uses the term "designated" in the places listed in the
following table. Note that the table summarizes the sections to a great extent and that
all readers should consult the actual sections of the regulations to determine the precise
requirements.
Occupational Safety General Regulations and Designated
Section |
Description |
2(j) |
definition of
"designated" - in writing by employer |
2(q)(i) |
Industrial firefighters
are designated to fight fires at their place of employment |
42(3) |
Perform electric charging
of rechargeable storage batteries in a designated area or room |
53(2)(b)(i) |
Where reasonable attempts
have been made to contact the person who locked out the machine, equipment, tool or
electrical installation and that person is not available, a competent person who is
designated in the written lock-out procedure may remove a lock-out device or a lock-out
tag |
56(a) |
Designate hoist,
industrial lift truck or powered mobile equipment operators |
57(1) |
Designate signallers |
62(3) |
Designate competent
persons who do welding on a falling objects protective structure that affects the
structural integrity of the structure |
64 |
Designate competent
persons who do welding on a rollover protective structure that affects the structural
integrity of the structure |
70(1)(b) |
Designate competent
persons to visually and manually inspect a hoist, industrial lift truck or powered mobile
equipment that has wire ropes, drums and sheaves |
80(13) |
Designate competent
persons to use rigging hardware |
82(3)(b) |
Designate competent
persons to repair and maintain components that are propane appliances and equipment |
93(3) |
Designate locations for
emergency stop devices for conveyors |
97(3) |
Designate competent
persons to inspect abrasive wheels and grinders |
99 |
Designate competent
persons to maintain pneumatic grinder governors |
106(a) |
Designate competent
persons to repair portable power-operated hand tools |
110(2) |
Designate competent
persons to weld |
113(2)(b) |
Designate competent
persons to examine containers before welding |
125(4) |
Designate competent
persons to be safety watchers during electrical work |
130(8) |
Designate competent
persons to perform an assessment of confined space prior to the entry of any person into
the confined space |
131(1) |
Designate competent
persons to certify confined spaces |
134(2) |
Designate competent
persons to be watchers during confined space entry |
165(1)(a) |
Designate the
"demolition zone" |
171(2) |
Designate competent
persons to inspect a trench cage |
183(1) |
Designate competent
persons to inspect the working face at a surface mine |
199 |
Designate competent
persons to inspect body harnesses after fires |
203(1) |
Designated industrial
firefighters to receive adequate training |